Výměnný návěsWECON
4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
Výměnný návěs
WECON
4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
Rok výroby
2017
Stav
Použitý
Umístění
Furth im Wald 

Zobrazit obrázky
Zobrazit mapu
Základní údaje
Cena a lokalita
- Místo prodejce:
- Boehmerstrasse 12, 93437 Furth im Wald, Německo

Zavolat
Technické údaje
- Maximální hmotnost nákladu:
- 13 200 kg
- Celková hmotnost:
- 16 000 kg
- První registrace:
- 06/2017
- Délka ložné plochy:
- 7 040 mm
- Šířka ložného prostoru:
- 2 480 mm
- Výška ložného prostoru:
- 2 200 mm
- Objem ložného prostoru:
- 38 m³
- Celková šířka:
- 2 550 mm
- Celková výška:
- 2 450 mm
Podrobnosti nabídky
- ID inzerátu:
- A187-59-296
- Referenční číslo:
- WECON_2017
- Aktualizace:
- naposledy dne 10.07.2025
Popis
WECON Curtainsider SCHIEBEPLANEN PLATFORM BDF Swap Body
Model: Duke WPR 715 SG
Year of manufacture: 06/2017
First owner in Germany!
3 pieces WPR 715 SG with the following equipment:
WECON standard curtainsider swap platform, Duke type WPR 715 SG
External dimensions:
Build length: 7,150 mm
Build width: 2,550 mm
Internal dimensions:
Build length: 7,040 mm
Build width: 2,480 mm
Tare weight: 2,590 kg
Gross permitted weight: 16,000 kg
Internal height: 2,200 mm with sliding roof included
External height: 2,450 mm (corner height 2,450 mm = C 00)
Side through-loading height: 2,120 mm
Rear through-loading height: 2,165 mm
Forklift pockets at rear integrated into the floor frame
Reinforced execution of zinc pipes for carrying a truck-mounted forklift.
Bracket for chain securing required on the body.
--> Center tunnel is restricted due to reinforced design
Suitable for continuous operation!
Floor frame: Made of quality steel, galvanized, frame height 215 mm,
4 container corner castings on 20' basis, 4 catch edges according to EN 284, 120 mm wheel clearance
Floor: Multi-bonded plywood floor, approx. 25 mm thick, suitable for forklift trucks, axle load up to 5,460 kg
Support legs: fixed, parking height 1,320 mm, galvanized
15 pairs of lashing rings. Layout: from VK STW to center, 1st pair of lashing rings approx 400 mm, then even spacing for remaining rings
One pair of lashing rings mounted on the inside of the front wall stanchion at a height of 1,000 mm above floor level
One-sided pallet stop edge 30 mm high on the left in the direction of travel (standard curtain side)
Lashing points via elongated slots (approx. 15 x 30 mm), spacing between slots approx. 200 mm
Through-loading height is reduced by 30 mm
Front wall: smooth, bolted steel front wall, full-height, cassette construction (cassettes galvanized)
Film faced plywood panel inside the front wall, 1,500 mm high, 12 mm thick
Gisdpfx Aaev Rtyascor
Front wall inside with collision protection: 300 mm high galvanized steel sheet
Rear double-door portal: smooth, sandwich design, 4 internal locking rods, 4 hinges per door leaf
Left side wall: sliding curtain according to DIN EN 12641-2: Quality 890 g/m², strap grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN, stainless steel strap lock with pressure securing
1 center stanchion, arranged symmetrically → left in the direction of travel
Each stanchion with 3 rows of slat pockets and one row of collection pockets (approx. 600 mm high) on the floor
8 aluminum insert slats left side, approx. 100 mm high
Wecon RAPIDO RIGHT: vertical steel profiles connected to the side curtain and guided in the upper and lower tracks with rollers
- Vertical curtain tensioners omitted
- Center stanchions omitted
- Horizontal insert slats omitted
Fixed curtain roof, designed as sliding roof standard (locked only)
Roof with parallel running rails, width between rails approx. 2,370 mm, distance from underside of rail to underside of roof bow approx. 90 mm
Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and powder-coated in standard RAL color
Roof tarpaulin: RAL 9010 (pure white)
Side curtain: RAL 9010 (pure white)
Front wall: RAL 9010 (pure white)
Rear portal: RAL 9010 (pure white)
TÜV certificate code XL included
The certificate confirms the load securing capability of the superstructure. Requirements according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR and E.
Inzerát byl přeložen automaticky. Mohou se vyskytnout chyby v překladu.
Model: Duke WPR 715 SG
Year of manufacture: 06/2017
First owner in Germany!
3 pieces WPR 715 SG with the following equipment:
WECON standard curtainsider swap platform, Duke type WPR 715 SG
External dimensions:
Build length: 7,150 mm
Build width: 2,550 mm
Internal dimensions:
Build length: 7,040 mm
Build width: 2,480 mm
Tare weight: 2,590 kg
Gross permitted weight: 16,000 kg
Internal height: 2,200 mm with sliding roof included
External height: 2,450 mm (corner height 2,450 mm = C 00)
Side through-loading height: 2,120 mm
Rear through-loading height: 2,165 mm
Forklift pockets at rear integrated into the floor frame
Reinforced execution of zinc pipes for carrying a truck-mounted forklift.
Bracket for chain securing required on the body.
--> Center tunnel is restricted due to reinforced design
Suitable for continuous operation!
Floor frame: Made of quality steel, galvanized, frame height 215 mm,
4 container corner castings on 20' basis, 4 catch edges according to EN 284, 120 mm wheel clearance
Floor: Multi-bonded plywood floor, approx. 25 mm thick, suitable for forklift trucks, axle load up to 5,460 kg
Support legs: fixed, parking height 1,320 mm, galvanized
15 pairs of lashing rings. Layout: from VK STW to center, 1st pair of lashing rings approx 400 mm, then even spacing for remaining rings
One pair of lashing rings mounted on the inside of the front wall stanchion at a height of 1,000 mm above floor level
One-sided pallet stop edge 30 mm high on the left in the direction of travel (standard curtain side)
Lashing points via elongated slots (approx. 15 x 30 mm), spacing between slots approx. 200 mm
Through-loading height is reduced by 30 mm
Front wall: smooth, bolted steel front wall, full-height, cassette construction (cassettes galvanized)
Film faced plywood panel inside the front wall, 1,500 mm high, 12 mm thick
Gisdpfx Aaev Rtyascor
Front wall inside with collision protection: 300 mm high galvanized steel sheet
Rear double-door portal: smooth, sandwich design, 4 internal locking rods, 4 hinges per door leaf
Left side wall: sliding curtain according to DIN EN 12641-2: Quality 890 g/m², strap grid 500 x 600 mm, tear resistance: vertical 24 kN, horizontal 13 kN, stainless steel strap lock with pressure securing
1 center stanchion, arranged symmetrically → left in the direction of travel
Each stanchion with 3 rows of slat pockets and one row of collection pockets (approx. 600 mm high) on the floor
8 aluminum insert slats left side, approx. 100 mm high
Wecon RAPIDO RIGHT: vertical steel profiles connected to the side curtain and guided in the upper and lower tracks with rollers
- Vertical curtain tensioners omitted
- Center stanchions omitted
- Horizontal insert slats omitted
Fixed curtain roof, designed as sliding roof standard (locked only)
Roof with parallel running rails, width between rails approx. 2,370 mm, distance from underside of rail to underside of roof bow approx. 90 mm
Coating: Floor frame and support legs hot-dip galvanized, body parts dip-primed and powder-coated in standard RAL color
Roof tarpaulin: RAL 9010 (pure white)
Side curtain: RAL 9010 (pure white)
Front wall: RAL 9010 (pure white)
Rear portal: RAL 9010 (pure white)
TÜV certificate code XL included
The certificate confirms the load securing capability of the superstructure. Requirements according to VDI 2700, EN 283, EN 12195 Part 1-2000, ADR and E.
Inzerát byl přeložen automaticky. Mohou se vyskytnout chyby v překladu.
Poskytovatel
Poznámka: Zaregistrujte se zdarma nebo se přihlaste, abyste získali všechny informace.
Registrován od: 2005
45 Inzeráty online
Odeslat poptávku
Telefon & Fax
+49 9973 ... inzeráty
Tyto inzeráty by vás také mohly zajímat.
Malý inzerát
Furth im Wald
198 km
Výměnný návěs
WECON4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
WECON4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
Malý inzerát
Sittensen
565 km
Meziměstský autobus
MERCEDES-BENZO 560 Intouro, Euro 6, 50 Sitze, 1. Hand, 2 Stk.
MERCEDES-BENZO 560 Intouro, Euro 6, 50 Sitze, 1. Hand, 2 Stk.
Malý inzerát
Furth im Wald
198 km
Výměnný návěs
WECON4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
WECON4x Duke WPR715 SG RAPIDO Staplerhalter verzinkt
Malý inzerát
Lodi
673 km
Standardní traktorová jednotka
SCANIAR450 - TRATTORE CON RETARDER - EURO 6
SCANIAR450 - TRATTORE CON RETARDER - EURO 6
Malý inzerát
Andelst
724 km
Jeřábové vozidlo
MANTGX 33.560 8X4 TRIDEM + HMF 4020-K8 KRAAN/KRAN/...
MANTGX 33.560 8X4 TRIDEM + HMF 4020-K8 KRAAN/KRAN/...
Malý inzerát
Sassenburg
455 km
Kloubový autobus
Mercedes-BenzDaimler-Benz AG/Foodtruck
Mercedes-BenzDaimler-Benz AG/Foodtruck
Malý inzerát
Betzdorf
552 km
Prodejní přívěs
HOFMANNVerkaufsanhänger Lenkachsanhänger 3500kg 660cm
HOFMANNVerkaufsanhänger Lenkachsanhänger 3500kg 660cm
Malý inzerát
Bobenheim - Roxheim
511 km
Standardní tahač
IVECOS-Way AS440S49T/P Retarder !! MIETE !! ab 2450¤
IVECOS-Way AS440S49T/P Retarder !! MIETE !! ab 2450¤
Malý inzerát
Deggendorf
213 km
Skříňový nákladní automobil
MANTGX26.460 E6 6x2 Koffer Retarder AHK Lenkachse
MANTGX26.460 E6 6x2 Koffer Retarder AHK Lenkachse
Malý inzerát
Caivano
990 km
Standardní silniční tahač
Mercedes-BenzACTROS 1851 2021
Mercedes-BenzACTROS 1851 2021
Váš inzerát byl úspěšně smazán
Došlo k chybě













































































































































































































































